Autore Topic: [RISOLTO] Il touchpad sminchiato  (Letto 2424 volte)

shishimaru

  • Visitatore
[RISOLTO] Il touchpad sminchiato
« il: Novembre 27, 2011, 04:37:48 pm »
Visto che ho già domandato su LQH, u-it e ubuntuforums.org, mi sono detto "beh, non completi la collezione? :lki: " e allora eccomi qua :ueue:

Come certamente già saprete, mentre ieri giocavo a Minecraft mi sono accorto che si era letteralmente incantato, come se il click sinistro del mouse rimanesse premuto (fantastico su Minecraft poi, scavavo continuamente sotto terra, sotto casa, senza poter fermare nulla). Parecchio tempo fa era successa una cosa simile sempre dopo aver giocato a Minecraft, anche se il problemino era un pelo differente. Risolsi rigiocando a MC :look:
Questa volta non funziona :asd:
Se uso un mouse USB tutto bene, ma se non disattivo il touchpad e lo tocco, si sminchia anche il mouse USB. Nel menu "Mouse" non compare più alcuna traccia del mio touchpad del cavolo. Avreste consigli da darmi, anche solo per capire meglio cosa succede e cosa non succede? :ueue:
« Ultima modifica: Novembre 28, 2011, 12:45:54 pm da shishimaru »

Buntolo

  • Visitatore
Re:Il touchpad sminchiato
« Risposta #1 il: Novembre 27, 2011, 04:56:33 pm »
GUarda se da una live funziona bene, potrebbe essere un problema hardware.

shishimaru

  • Visitatore
Re:Il touchpad sminchiato
« Risposta #2 il: Novembre 27, 2011, 04:58:11 pm »
Occacchio, funziona di culo anche da live!
Non è normale :omg:

SuNjACk

  • Visitatore
Re:Il touchpad sminchiato
« Risposta #3 il: Novembre 27, 2011, 05:09:41 pm »
Risalda il touchpad :lki:

shishimaru

  • Visitatore
Re:Il touchpad sminchiato
« Risposta #4 il: Novembre 27, 2011, 08:21:09 pm »
Utile :lki:
Mah. il touchpad funziona male ma è attivo, mi pare strano che dal sistema operativo non venga fuori nulla. Ovvero non ci sono touchpad.

SuNjACk

  • Visitatore
Re:Il touchpad sminchiato
« Risposta #5 il: Novembre 27, 2011, 09:03:48 pm »
Hai provato a far funzionere il touchpad da tty?

shishimaru

  • Visitatore
Re:Il touchpad sminchiato
« Risposta #6 il: Novembre 27, 2011, 09:22:58 pm »
Hai provato a far funzionere il touchpad da tty?

In che senso? :ueue:

SuNjACk

  • Visitatore
Re:Il touchpad sminchiato
« Risposta #7 il: Novembre 27, 2011, 09:23:58 pm »
Hai provato a far funzionere il touchpad da tty?

In che senso? :ueue:

Lo sai che ti sto prendendo per il culo no? Lo sai che nelle tty non esiste nemmeno un puntatore? :lki:

shishimaru

  • Visitatore
Re:Il touchpad sminchiato
« Risposta #8 il: Novembre 27, 2011, 09:24:54 pm »
Hai provato a far funzionere il touchpad da tty?

In che senso? :ueue:

Lo sai che ti sto prendendo per il culo no? Lo sai che nelle tty non esiste nemmeno un puntatore? :lki:

Per questo chiedevo in che senso. Ne sapeva di presa per il culo :asd:
Aspetta, apro una finestra nel terminale tty2 :lkof:

SuNjACk

  • Visitatore
Re:Il touchpad sminchiato
« Risposta #9 il: Novembre 27, 2011, 09:27:49 pm »
Hai provato a vedere se c'è qualcosa nel log di Xorg?

shishimaru

  • Visitatore
Re:Il touchpad sminchiato
« Risposta #10 il: Novembre 27, 2011, 09:32:53 pm »
Uhm...

Codice: [Seleziona]
shishimaru@shishimaru-5730:~$ cat /var/log/Xorg.0.log
[    22.476]
X.Org X Server 1.10.1
Release Date: 2011-04-15
[    22.476] X Protocol Version 11, Revision 0
[    22.476] Build Operating System: Linux 2.6.24-28-server x86_64 Ubuntu
[    22.476] Current Operating System: Linux shishimaru-5730 3.1.0-desktop #1 SMP Sat Nov 19 21:44:05 CET 2011 x86_64
[    22.476] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-3.1.0-desktop root=UUID=4abcf1d2-9c44-49b1-8a47-6ecd37488dab ro quiet splash vt.handoff=7
[    22.476] Build Date: 13 October 2011  05:43:01PM
[    22.476] xorg-server 2:1.10.1-1ubuntu1.3 (For technical support please see http://www.ubuntu.com/support)
[    22.476] Current version of pixman: 0.20.2
[    22.476] Before reporting problems, check http://wiki.x.org
to make sure that you have the latest version.
[    22.476] Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
[    22.476] (==) Log file: "/var/log/Xorg.0.log", Time: Sun Nov 27 19:38:28 2011
[    22.477] (==) Using system config directory "/usr/share/X11/xorg.conf.d"
[    22.477] (==) No Layout section.  Using the first Screen section.
[    22.477] (==) No screen section available. Using defaults.
[    22.477] (**) |-->Screen "Default Screen Section" (0)
[    22.477] (**) |   |-->Monitor "<default monitor>"
[    22.477] (==) No monitor specified for screen "Default Screen Section".
Using a default monitor configuration.
[    22.477] (==) Automatically adding devices
[    22.477] (==) Automatically enabling devices
[    22.477] (WW) The directory "/usr/share/fonts/X11/cyrillic" does not exist.
[    22.477] Entry deleted from font path.
[    22.477] (WW) The directory "/usr/share/fonts/X11/100dpi/" does not exist.
[    22.477] Entry deleted from font path.
[    22.477] (WW) The directory "/usr/share/fonts/X11/75dpi/" does not exist.
[    22.477] Entry deleted from font path.
[    22.477] (WW) The directory "/usr/share/fonts/X11/100dpi" does not exist.
[    22.477] Entry deleted from font path.
[    22.477] (WW) The directory "/usr/share/fonts/X11/75dpi" does not exist.
[    22.477] Entry deleted from font path.
[    22.477] (==) FontPath set to:
/usr/share/fonts/X11/misc,
/usr/share/fonts/X11/Type1,
/var/lib/defoma/x-ttcidfont-conf.d/dirs/TrueType,
built-ins
[    22.477] (==) ModulePath set to "/usr/lib/xorg/extra-modules,/usr/lib/xorg/modules"
[    22.477] (II) The server relies on udev to provide the list of input devices.
If no devices become available, reconfigure udev or disable AutoAddDevices.
[    22.477] (II) Loader magic: 0x7e17e0
[    22.477] (II) Module ABI versions:
[    22.477] X.Org ANSI C Emulation: 0.4
[    22.477] X.Org Video Driver: 10.0
[    22.477] X.Org XInput driver : 12.3
[    22.477] X.Org Server Extension : 5.0
[    22.479] (--) PCI:*(0:0:2:0) 8086:2a42:1025:013c rev 7, Mem @ 0xf4000000/4194304, 0xd0000000/268435456, I/O @ 0x00001800/8
[    22.479] (--) PCI: (0:0:2:1) 8086:2a43:1025:013c rev 7, Mem @ 0xf4400000/1048576
[    22.479] (WW) Open ACPI failed (/var/run/acpid.socket) (No such file or directory)
[    22.479] (II) LoadModule: "extmod"
[    22.484] (II) Loading /usr/lib/xorg/modules/extensions/libextmod.so
[    22.484] (II) Module extmod: vendor="X.Org Foundation"
[    22.484] compiled for 1.10.1, module version = 1.0.0
[    22.484] Module class: X.Org Server Extension
[    22.484] ABI class: X.Org Server Extension, version 5.0
[    22.484] (II) Loading extension MIT-SCREEN-SAVER
[    22.484] (II) Loading extension XFree86-VidModeExtension
[    22.484] (II) Loading extension XFree86-DGA
[    22.484] (II) Loading extension DPMS
[    22.484] (II) Loading extension XVideo
[    22.484] (II) Loading extension XVideo-MotionCompensation
[    22.484] (II) Loading extension X-Resource
[    22.484] (II) LoadModule: "dbe"
[    22.485] (II) Loading /usr/lib/xorg/modules/extensions/libdbe.so
[    22.485] (II) Module dbe: vendor="X.Org Foundation"
[    22.485] compiled for 1.10.1, module version = 1.0.0
[    22.485] Module class: X.Org Server Extension
[    22.485] ABI class: X.Org Server Extension, version 5.0
[    22.485] (II) Loading extension DOUBLE-BUFFER
[    22.485] (II) LoadModule: "glx"
[    22.485] (II) Loading /usr/lib/xorg/modules/extensions/libglx.so
[    22.485] (II) Module glx: vendor="X.Org Foundation"
[    22.485] compiled for 1.10.1, module version = 1.0.0
[    22.485] ABI class: X.Org Server Extension, version 5.0
[    22.485] (==) AIGLX enabled
[    22.485] (II) Loading extension GLX
[    22.485] (II) LoadModule: "record"
[    22.485] (II) Loading /usr/lib/xorg/modules/extensions/librecord.so
[    22.485] (II) Module record: vendor="X.Org Foundation"
[    22.485] compiled for 1.10.1, module version = 1.13.0
[    22.485] Module class: X.Org Server Extension
[    22.485] ABI class: X.Org Server Extension, version 5.0
[    22.485] (II) Loading extension RECORD
[    22.485] (II) LoadModule: "dri"
[    22.491] (II) Loading /usr/lib/xorg/modules/extensions/libdri.so
[    22.491] (II) Module dri: vendor="X.Org Foundation"
[    22.491] compiled for 1.10.1, module version = 1.0.0
[    22.491] ABI class: X.Org Server Extension, version 5.0
[    22.491] (II) Loading extension XFree86-DRI
[    22.491] (II) LoadModule: "dri2"
[    22.491] (II) Loading /usr/lib/xorg/modules/extensions/libdri2.so
[    22.491] (II) Module dri2: vendor="X.Org Foundation"
[    22.491] compiled for 1.10.1, module version = 1.2.0
[    22.491] ABI class: X.Org Server Extension, version 5.0
[    22.491] (II) Loading extension DRI2
[    22.491] (==) Matched intel as autoconfigured driver 0
[    22.491] (==) Matched vesa as autoconfigured driver 1
[    22.491] (==) Matched fbdev as autoconfigured driver 2
[    22.491] (==) Assigned the driver to the xf86ConfigLayout
[    22.491] (II) LoadModule: "intel"
[    22.492] (II) Loading /usr/lib/xorg/modules/drivers/intel_drv.so
[    22.492] (II) Module intel: vendor="X.Org Foundation"
[    22.492] compiled for 1.10.1, module version = 2.14.0
[    22.492] Module class: X.Org Video Driver
[    22.492] ABI class: X.Org Video Driver, version 10.0
[    22.492] (II) LoadModule: "vesa"
[    22.492] (II) Loading /usr/lib/xorg/modules/drivers/vesa_drv.so
[    22.492] (II) Module vesa: vendor="X.Org Foundation"
[    22.492] compiled for 1.10.0, module version = 2.3.0
[    22.492] Module class: X.Org Video Driver
[    22.492] ABI class: X.Org Video Driver, version 10.0
[    22.492] (II) LoadModule: "fbdev"
[    22.493] (II) Loading /usr/lib/xorg/modules/drivers/fbdev_drv.so
[    22.493] (II) Module fbdev: vendor="X.Org Foundation"
[    22.493] compiled for 1.10.0, module version = 0.4.2
[    22.493] ABI class: X.Org Video Driver, version 10.0
[    22.493] (II) intel: Driver for Intel Integrated Graphics Chipsets: i810,
i810-dc100, i810e, i815, i830M, 845G, 854, 852GM/855GM, 865G, 915G,
E7221 (i915), 915GM, 945G, 945GM, 945GME, Pineview GM, Pineview G,
965G, G35, 965Q, 946GZ, 965GM, 965GME/GLE, G33, Q35, Q33, GM45,
4 Series, G45/G43, Q45/Q43, G41, B43, B43, Clarkdale, Arrandale,
Sandybridge, Sandybridge, Sandybridge, Sandybridge, Sandybridge,
Sandybridge, Sandybridge
[    22.494] (II) VESA: driver for VESA chipsets: vesa
[    22.494] (II) FBDEV: driver for framebuffer: fbdev
[    22.494] (++) using VT number 7

[    22.496] (II) Loading /usr/lib/xorg/modules/drivers/intel_drv.so
[    22.496] (WW) Falling back to old probe method for vesa
[    22.496] (WW) Falling back to old probe method for fbdev
[    22.496] (II) Loading sub module "fbdevhw"
[    22.496] (II) LoadModule: "fbdevhw"
[    22.496] (II) Loading /usr/lib/xorg/modules/libfbdevhw.so
[    22.496] (II) Module fbdevhw: vendor="X.Org Foundation"
[    22.496] compiled for 1.10.1, module version = 0.0.2
[    22.496] ABI class: X.Org Video Driver, version 10.0
[    22.496] drmOpenDevice: node name is /dev/dri/card0
[    22.496] drmOpenDevice: open result is 8, (OK)
[    22.496] drmOpenByBusid: Searching for BusID pci:0000:00:02.0
[    22.496] drmOpenDevice: node name is /dev/dri/card0
[    22.496] drmOpenDevice: open result is 8, (OK)
[    22.496] drmOpenByBusid: drmOpenMinor returns 8
[    22.503] drmOpenByBusid: drmGetBusid reports pci:0000:00:02.0
[    22.503] (II) intel(0): Creating default Display subsection in Screen section
"Default Screen Section" for depth/fbbpp 24/32
[    22.503] (==) intel(0): Depth 24, (--) framebuffer bpp 32
[    22.503] (==) intel(0): RGB weight 888
[    22.503] (==) intel(0): Default visual is TrueColor
[    22.503] (II) intel(0): Integrated Graphics Chipset: Intel(R) GM45
[    22.503] (--) intel(0): Chipset: "GM45"
[    22.503] (**) intel(0): Relaxed fencing enabled
[    22.503] (**) intel(0): Tiling enabled
[    22.503] (**) intel(0): SwapBuffers wait enabled
[    22.503] (==) intel(0): video overlay key set to 0x101fe
[    22.503] (II) intel(0): Output LVDS1 has no monitor section
[    22.506] (II) intel(0): found backlight control interface /sys/class/backlight/acpi_video0
[    22.522] (II) intel(0): Output VGA1 has no monitor section
[    22.568] (II) intel(0): Output HDMI1 has no monitor section
[    22.568] (II) intel(0): Output DP1 has no monitor section
[    22.583] (II) intel(0): Output DP2 has no monitor section
[    22.583] (II) intel(0): EDID for output LVDS1
[    22.583] (II) intel(0): Manufacturer: AUO  Model: 8074  Serial#: 0
[    22.583] (II) intel(0): Year: 2006  Week: 1
[    22.583] (II) intel(0): EDID Version: 1.3
[    22.583] (II) intel(0): Digital Display Input
[    22.583] (II) intel(0): Max Image Size [cm]: horiz.: 33  vert.: 21
[    22.583] (II) intel(0): Gamma: 2.20
[    22.583] (II) intel(0): No DPMS capabilities specified
[    22.583] (II) intel(0): Supported color encodings: RGB 4:4:4 YCrCb 4:4:4
[    22.583] (II) intel(0): First detailed timing is preferred mode
[    22.583] (II) intel(0): redX: 0.590 redY: 0.345   greenX: 0.315 greenY: 0.555
[    22.583] (II) intel(0): blueX: 0.155 blueY: 0.155   whiteX: 0.313 whiteY: 0.329
[    22.583] (II) intel(0): Manufacturer's mask: 0
[    22.583] (II) intel(0): Supported detailed timing:
[    22.583] (II) intel(0): clock: 71.1 MHz   Image Size:  331 x 207 mm
[    22.583] (II) intel(0): h_active: 1280  h_sync: 1328  h_sync_end 1360 h_blank_end 1440 h_border: 0
[    22.583] (II) intel(0): v_active: 800  v_sync: 803  v_sync_end 809 v_blanking: 823 v_border: 0
[    22.583] (II) intel(0): Unknown vendor-specific block f
[    22.583] (II) intel(0):  AUO
[    22.583] (II) intel(0):  B154EW08 V0
[    22.583] (II) intel(0): EDID (in hex):
[    22.583] (II) intel(0): 00ffffffffffff0006af748000000000
[    22.583] (II) intel(0): 01100103802115780a1cf59758508e27
[    22.583] (II) intel(0): 27505400000001010101010101010101
[    22.583] (II) intel(0): 010101010101c71b00a0502017303020
[    22.583] (II) intel(0): 36004bcf100000180000000f00000000
[    22.583] (II) intel(0): 00000000000000000020000000fe0041
[    22.583] (II) intel(0): 554f0a202020202020202020000000fe
[    22.583] (II) intel(0): 004231353445573038205630200a0045
[    22.583] (II) intel(0): EDID vendor "AUO", prod id 32884
[    22.583] (II) intel(0): Printing DDC gathered Modelines:
[    22.583] (II) intel(0): Modeline "1280x800"x0.0   71.11  1280 1328 1360 1440  800 803 809 823 -hsync -vsync (49.4 kHz)
[    22.583] (II) intel(0): Not using default mode "320x240" (doublescan mode not supported)
[    22.583] (II) intel(0): Not using default mode "400x300" (doublescan mode not supported)
[    22.583] (II) intel(0): Not using default mode "400x300" (doublescan mode not supported)
[    22.584] (II) intel(0): Not using default mode "512x384" (doublescan mode not supported)
[    22.584] (II) intel(0): Not using default mode "640x480" (doublescan mode not supported)
[    22.584] (II) intel(0): Not using default mode "640x512" (doublescan mode not supported)
[    22.584] (II) intel(0): Not using default mode "800x600" (doublescan mode not supported)
[    22.584] (II) intel(0): Not using default mode "896x672" (doublescan mode not supported)
[    22.584] (II) intel(0): Not using default mode "928x696" (doublescan mode not supported)
[    22.584] (II) intel(0): Not using default mode "960x720" (doublescan mode not supported)
[    22.584] (II) intel(0): Not using default mode "576x432" (doublescan mode not supported)
[    22.584] (II) intel(0): Not using default mode "680x384" (doublescan mode not supported)
[    22.584] (II) intel(0): Not using default mode "680x384" (doublescan mode not supported)
[    22.584] (II) intel(0): Not using default mode "700x525" (doublescan mode not supported)
[    22.584] (II) intel(0): Not using default mode "720x450" (doublescan mode not supported)
[    22.584] (II) intel(0): Not using default mode "800x512" (doublescan mode not supported)
[    22.584] (II) intel(0): Not using default mode "840x525" (doublescan mode not supported)
[    22.584] (II) intel(0): Not using default mode "840x525" (doublescan mode not supported)
[    22.584] (II) intel(0): Not using default mode "960x540" (doublescan mode not supported)
[    22.584] (II) intel(0): Not using default mode "960x600" (doublescan mode not supported)
[    22.584] (II) intel(0): Not using default mode "1024x768" (doublescan mode not supported)
[    22.584] (II) intel(0): Printing probed modes for output LVDS1
[    22.584] (II) intel(0): Modeline "1280x800"x60.0   71.11  1280 1328 1360 1440  800 803 809 823 -hsync -vsync (49.4 kHz)
[    22.584] (II) intel(0): Modeline "1024x768"x60.0   65.00  1024 1048 1184 1344  768 771 777 806 -hsync -vsync (48.4 kHz)
[    22.584] (II) intel(0): Modeline "800x600"x60.3   40.00  800 840 968 1056  600 601 605 628 +hsync +vsync (37.9 kHz)
[    22.584] (II) intel(0): Modeline "800x600"x56.2   36.00  800 824 896 1024  600 601 603 625 +hsync +vsync (35.2 kHz)
[    22.584] (II) intel(0): Modeline "640x480"x59.9   25.18  640 656 752 800  480 490 492 525 -hsync -vsync (31.5 kHz)
[    22.600] (II) intel(0): EDID for output VGA1
[    22.642] (II) intel(0): EDID for output HDMI1
[    22.642] (II) intel(0): EDID for output DP1
[    22.658] (II) intel(0): EDID for output DP2
[    22.658] (II) intel(0): Output LVDS1 connected
[    22.658] (II) intel(0): Output VGA1 disconnected
[    22.658] (II) intel(0): Output HDMI1 disconnected
[    22.658] (II) intel(0): Output DP1 disconnected
[    22.658] (II) intel(0): Output DP2 disconnected
[    22.658] (II) intel(0): Using exact sizes for initial modes
[    22.658] (II) intel(0): Output LVDS1 using initial mode 1280x800
[    22.658] (II) intel(0): Using default gamma of (1.0, 1.0, 1.0) unless otherwise stated.
[    22.658] (II) intel(0): Kernel page flipping support detected, enabling
[    22.658] (**) intel(0): Display dimensions: (330, 210) mm
[    22.658] (**) intel(0): DPI set to (98, 96)
[    22.658] (II) Loading sub module "fb"
[    22.658] (II) LoadModule: "fb"
[    22.664] (II) Loading /usr/lib/xorg/modules/libfb.so
[    22.664] (II) Module fb: vendor="X.Org Foundation"
[    22.664] compiled for 1.10.1, module version = 1.0.0
[    22.664] ABI class: X.Org ANSI C Emulation, version 0.4
[    22.664] (II) UnloadModule: "vesa"
[    22.664] (II) Unloading vesa
[    22.664] (II) UnloadModule: "fbdev"
[    22.664] (II) Unloading fbdev
[    22.664] (II) UnloadModule: "fbdevhw"
[    22.664] (II) Unloading fbdevhw
[    22.664] (==) Depth 24 pixmap format is 32 bpp
[    22.664] (==) intel(0): VideoRam: 262144 KB
[    22.665] (II) intel(0): [DRI2] Setup complete
[    22.665] (II) intel(0): [DRI2]   DRI driver: i965
[    22.665] (II) intel(0): Allocated new frame buffer 1280x800 stride 5120, tiled
[    22.688] (II) UXA(0): Driver registered support for the following operations:
[    22.688] (II)         solid
[    22.688] (II)         copy
[    22.688] (II)         composite (RENDER acceleration)
[    22.688] (II)         put_image
[    22.688] (II)         get_image
[    22.688] (==) intel(0): Backing store disabled
[    22.688] (==) intel(0): Silken mouse enabled
[    22.688] (II) intel(0): Initializing HW Cursor
[    22.709] (II) intel(0): RandR 1.2 enabled, ignore the following RandR disabled message.
[    22.721] (==) intel(0): DPMS enabled
[    22.721] (==) intel(0): Intel XvMC decoder enabled
[    22.721] (II) intel(0): Set up textured video
[    22.721] (II) intel(0): [XvMC] xvmc_vld driver initialized.
[    22.721] (II) intel(0): direct rendering: DRI2 Enabled
[    22.721] (==) intel(0): hotplug detection: "enabled"
[    22.721] (--) RandR disabled
[    22.721] (II) Initializing built-in extension Generic Event Extension
[    22.721] (II) Initializing built-in extension SHAPE
[    22.721] (II) Initializing built-in extension MIT-SHM
[    22.721] (II) Initializing built-in extension XInputExtension
[    22.721] (II) Initializing built-in extension XTEST
[    22.721] (II) Initializing built-in extension BIG-REQUESTS
[    22.721] (II) Initializing built-in extension SYNC
[    22.721] (II) Initializing built-in extension XKEYBOARD
[    22.721] (II) Initializing built-in extension XC-MISC
[    22.721] (II) Initializing built-in extension SECURITY
[    22.721] (II) Initializing built-in extension XINERAMA
[    22.721] (II) Initializing built-in extension XFIXES
[    22.721] (II) Initializing built-in extension RENDER
[    22.721] (II) Initializing built-in extension RANDR
[    22.721] (II) Initializing built-in extension COMPOSITE
[    22.721] (II) Initializing built-in extension DAMAGE
[    22.721] (II) Initializing built-in extension GESTURE
[    22.735] (II) AIGLX: Trying DRI driver /usr/lib/dri/i965_dri.so
[    22.745] (II) AIGLX: enabled GLX_MESA_copy_sub_buffer
[    22.745] (II) AIGLX: enabled GLX_INTEL_swap_event
[    22.745] (II) AIGLX: enabled GLX_SGI_swap_control and GLX_MESA_swap_control
[    22.745] (II) AIGLX: enabled GLX_SGI_make_current_read
[    22.745] (II) AIGLX: GLX_EXT_texture_from_pixmap backed by buffer objects
[    22.745] (II) AIGLX: Loaded and initialized i965
[    22.745] (II) GLX: Initialized DRI2 GL provider for screen 0
[    22.745] (II) intel(0): Setting screen physical size to 338 x 211
[    22.762] (II) XKB: reuse xkmfile /var/lib/xkb/server-B20D7FC79C7F597315E3E501AEF10E0D866E8E92.xkm
[    22.786] (II) config/udev: Adding input device Power Button (/dev/input/event2)
[    22.787] (**) Power Button: Applying InputClass "evdev keyboard catchall"
[    22.787] (II) LoadModule: "evdev"
[    22.787] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
[    22.787] (II) Module evdev: vendor="X.Org Foundation"
[    22.787] compiled for 1.10.0.902, module version = 2.6.0
[    22.787] Module class: X.Org XInput Driver
[    22.787] ABI class: X.Org XInput driver, version 12.3
[    22.787] (II) Using input driver 'evdev' for 'Power Button'
[    22.787] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
[    22.787] (**) Power Button: always reports core events
[    22.787] (**) Power Button: Device: "/dev/input/event2"
[    22.794] (--) Power Button: Found keys
[    22.794] (II) Power Button: Configuring as keyboard
[    22.794] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXPWRBN:00/input/input2/event2"
[    22.794] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD)
[    22.794] (**) Option "xkb_rules" "evdev"
[    22.794] (**) Option "xkb_model" "pc105"
[    22.794] (**) Option "xkb_layout" "it"
[    22.796] (II) XKB: reuse xkmfile /var/lib/xkb/server-3781FECB9CB8D26EE03343DB2C93394EA704B98F.xkm
[    22.798] (II) config/udev: Adding input device Video Bus (/dev/input/event6)
[    22.798] (**) Video Bus: Applying InputClass "evdev keyboard catchall"
[    22.798] (II) Using input driver 'evdev' for 'Video Bus'
[    22.798] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
[    22.798] (**) Video Bus: always reports core events
[    22.798] (**) Video Bus: Device: "/dev/input/event6"
[    22.798] (--) Video Bus: Found keys
[    22.798] (II) Video Bus: Configuring as keyboard
[    22.798] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/device:00/PNP0A08:00/LNXVIDEO:00/input/input6/event6"
[    22.798] (II) XINPUT: Adding extended input device "Video Bus" (type: KEYBOARD)
[    22.798] (**) Option "xkb_rules" "evdev"
[    22.798] (**) Option "xkb_model" "pc105"
[    22.798] (**) Option "xkb_layout" "it"
[    22.826] (II) config/udev: Adding input device Lid Switch (/dev/input/event0)
[    22.826] (II) No input driver/identifier specified (ignoring)
[    22.827] (II) config/udev: Adding input device Sleep Button (/dev/input/event1)
[    22.827] (**) Sleep Button: Applying InputClass "evdev keyboard catchall"
[    22.827] (II) Using input driver 'evdev' for 'Sleep Button'
[    22.827] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
[    22.827] (**) Sleep Button: always reports core events
[    22.827] (**) Sleep Button: Device: "/dev/input/event1"
[    22.827] (--) Sleep Button: Found keys
[    22.827] (II) Sleep Button: Configuring as keyboard
[    22.827] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/device:00/PNP0C0E:00/input/input1/event1"
[    22.827] (II) XINPUT: Adding extended input device "Sleep Button" (type: KEYBOARD)
[    22.827] (**) Option "xkb_rules" "evdev"
[    22.827] (**) Option "xkb_model" "pc105"
[    22.827] (**) Option "xkb_layout" "it"
[    22.831] (II) config/udev: Adding input device Acer Crystal Eye webcam (/dev/input/event5)
[    22.831] (**) Acer Crystal Eye webcam: Applying InputClass "evdev keyboard catchall"
[    22.831] (II) Using input driver 'evdev' for 'Acer Crystal Eye webcam'
[    22.831] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
[    22.831] (**) Acer Crystal Eye webcam: always reports core events
[    22.832] (**) Acer Crystal Eye webcam: Device: "/dev/input/event5"
[    22.832] (--) Acer Crystal Eye webcam: Found keys
[    22.832] (II) Acer Crystal Eye webcam: Configuring as keyboard
[    22.832] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:1a.7/usb1/1-3/1-3:1.0/input/input5/event5"
[    22.832] (II) XINPUT: Adding extended input device "Acer Crystal Eye webcam" (type: KEYBOARD)
[    22.832] (**) Option "xkb_rules" "evdev"
[    22.832] (**) Option "xkb_model" "pc105"
[    22.832] (**) Option "xkb_layout" "it"
[    22.839] (II) config/udev: Adding input device HDA Intel HDMI/DP (/dev/input/event7)
[    22.839] (II) No input driver/identifier specified (ignoring)
[    22.839] (II) config/udev: Adding input device HDA Intel Headphone (/dev/input/event8)
[    22.839] (II) No input driver/identifier specified (ignoring)
[    22.841] (II) config/udev: Adding input device HID 1241:1166 (/dev/input/event4)
[    22.841] (**) HID 1241:1166: Applying InputClass "evdev pointer catchall"
[    22.841] (II) Using input driver 'evdev' for 'HID 1241:1166'
[    22.841] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
[    22.841] (**) HID 1241:1166: always reports core events
[    22.841] (**) HID 1241:1166: Device: "/dev/input/event4"
[    22.841] (--) HID 1241:1166: Found 9 mouse buttons
[    22.842] (--) HID 1241:1166: Found scroll wheel(s)
[    22.842] (--) HID 1241:1166: Found relative axes
[    22.842] (--) HID 1241:1166: Found x and y relative axes
[    22.842] (II) HID 1241:1166: Configuring as mouse
[    22.842] (II) HID 1241:1166: Adding scrollwheel support
[    22.842] (**) HID 1241:1166: YAxisMapping: buttons 4 and 5
[    22.842] (**) HID 1241:1166: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
[    22.842] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:1d.0/usb6/6-2/6-2:1.0/input/input4/event4"
[    22.842] (II) XINPUT: Adding extended input device "HID 1241:1166" (type: MOUSE)
[    22.842] (II) HID 1241:1166: initialized for relative axes.
[    22.842] (**) HID 1241:1166: (accel) keeping acceleration scheme 1
[    22.842] (**) HID 1241:1166: (accel) acceleration profile 0
[    22.842] (**) HID 1241:1166: (accel) acceleration factor: 2.000
[    22.842] (**) HID 1241:1166: (accel) acceleration threshold: 4
[    22.842] (II) config/udev: Adding input device HID 1241:1166 (/dev/input/mouse0)
[    22.842] (II) No input driver/identifier specified (ignoring)
[    22.855] (II) config/udev: Adding input device AT Translated Set 2 keyboard (/dev/input/event3)
[    22.855] (**) AT Translated Set 2 keyboard: Applying InputClass "evdev keyboard catchall"
[    22.855] (II) Using input driver 'evdev' for 'AT Translated Set 2 keyboard'
[    22.855] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
[    22.855] (**) AT Translated Set 2 keyboard: always reports core events
[    22.855] (**) AT Translated Set 2 keyboard: Device: "/dev/input/event3"
[    22.855] (--) AT Translated Set 2 keyboard: Found keys
[    22.855] (II) AT Translated Set 2 keyboard: Configuring as keyboard
[    22.855] (**) Option "config_info" "udev:/sys/devices/platform/i8042/serio0/input/input3/event3"
[    22.855] (II) XINPUT: Adding extended input device "AT Translated Set 2 keyboard" (type: KEYBOARD)
[    22.855] (**) Option "xkb_rules" "evdev"
[    22.855] (**) Option "xkb_model" "pc105"
[    22.855] (**) Option "xkb_layout" "it"
[    24.256] (II) intel(0): EDID vendor "AUO", prod id 32884
[    24.256] (II) intel(0): Printing DDC gathered Modelines:
[    24.256] (II) intel(0): Modeline "1280x800"x0.0   71.11  1280 1328 1360 1440  800 803 809 823 -hsync -vsync (49.4 kHz)
[    24.311] (II) intel(0): EDID vendor "AUO", prod id 32884
[    24.311] (II) intel(0): Printing DDC gathered Modelines:
[    24.311] (II) intel(0): Modeline "1280x800"x0.0   71.11  1280 1328 1360 1440  800 803 809 823 -hsync -vsync (49.4 kHz)
[    24.361] (II) intel(0): EDID vendor "AUO", prod id 32884
[    24.362] (II) intel(0): Printing DDC gathered Modelines:
[    24.362] (II) intel(0): Modeline "1280x800"x0.0   71.11  1280 1328 1360 1440  800 803 809 823 -hsync -vsync (49.4 kHz)
[    24.417] (II) intel(0): EDID vendor "AUO", prod id 32884
[    24.417] (II) intel(0): Printing DDC gathered Modelines:
[    24.417] (II) intel(0): Modeline "1280x800"x0.0   71.11  1280 1328 1360 1440  800 803 809 823 -hsync -vsync (49.4 kHz)
[    24.828] (II) intel(0): EDID vendor "AUO", prod id 32884
[    24.828] (II) intel(0): Printing DDC gathered Modelines:
[    24.828] (II) intel(0): Modeline "1280x800"x0.0   71.11  1280 1328 1360 1440  800 803 809 823 -hsync -vsync (49.4 kHz)
[    29.997] (II) intel(0): EDID vendor "AUO", prod id 32884
[    29.997] (II) intel(0): Printing DDC gathered Modelines:
[    29.997] (II) intel(0): Modeline "1280x800"x0.0   71.11  1280 1328 1360 1440  800 803 809 823 -hsync -vsync (49.4 kHz)
[   710.821] (II) intel(0): EDID vendor "AUO", prod id 32884
[   710.821] (II) intel(0): Printing DDC gathered Modelines:
[   710.821] (II) intel(0): Modeline "1280x800"x0.0   71.11  1280 1328 1360 1440  800 803 809 823 -hsync -vsync (49.4 kHz)

SuNjACk

  • Visitatore
Re:Il touchpad sminchiato
« Risposta #11 il: Novembre 27, 2011, 09:42:38 pm »
Non vedo niente di particolare.

shishimaru

  • Visitatore
Re:Il touchpad sminchiato
« Risposta #12 il: Novembre 27, 2011, 09:49:23 pm »
Già. Domani mi toccherà installare Windows dopo più di due anni di inutilizzo :facepalm: Voglio vedere se da lì funziona, nella peggiore delle ipotesi...

mustangtux

  • Visitatore
Re:Il touchpad sminchiato
« Risposta #13 il: Novembre 27, 2011, 10:01:07 pm »
mai provato con dei cereali cheerios?

shishimaru

  • Visitatore
Re:Il touchpad sminchiato
« Risposta #14 il: Novembre 27, 2011, 10:05:25 pm »
mai provato con dei cereali cheerios?

No, e non mi aiuterà.